​

 

The surface must be clean, firm, dry, without rust or grease. Always keep in mind that this product is to be applied to wood in its natural or virgin state.

​

Shake with a spatula before and during application to obtain a good homogeneous colour. Apply two coats with a dry cloth or flat brush following the direction of the grain.

Always mix the contents of the container well before use. Drying: under normal conditions 20°C / 65% relative humidity. Between coats 3 – 6 hours, dry 24 hours, cured 8 days.

 

Fields of application: new and/or used interior or exterior wood that does not have residues from previous treatments. Utensil cleaning: Varsol.